Glenn Charles

LIFE-STYLE | TRAVEL | AERIAL

Photographer/Videographer specializing in Life Style, Travel, and Aerial Imagery.  FAA 107 Certified for sUAS flight operations throughout the US.  Fully insured.  Videography work is limited to Aerial productions.

Based in Maine (May-December) and SWFL (Jan - April). Available for travel year round.

Filtering by Category: Bikepacking Gear

Porcelain Rocket Bags

A big thanks once again to Scott Felter for his support.  His Porcelain Rocket bags are simply mind blowingly awesome!!  I have used them non stop and had 0 failures or issues.  Scott recently built me new custom frame bag for the alaska trip with the double zip side panel.  This allows me to more easily get larger items in the bag such as stoves, fuel bottles, or even insulation layers.  Scott's attention to detail is evident in all of his bags and can be seen by the many happy customers going into extreme environments with his kit. 

For this trip I will only be using a Frame Bag, a Handlebar bag, and a Top Tube ditty bag.  On the back I will forgo my Booster Rocket pack and instead go with a rear rack and two Ortlieb panniers.  Aesthetically this runs against my grain, but the extreme conditions, remote nature of Alaska, and the scarcity of resupply points demand more storage than a typical bikepacking setup.

20130123161328_0025-2.jpg

This image shows nicely the advantage of the Panel Loader.  With this style bag, you have 2-3 options for how the bag is opened.  The top, horizontal zipper is a 2 way zipper that can be opened from either the left or the right side.  The vertical zipper goes from top to bottom.  If you open both zippers, the panel opens wide for the insertion of bulky objects.  This allows the following combinations:

  1. Zip the top from left to right and access the panel from the top
  2. Zip the top from right to left and access the panel from the top
  3. Zip the side from top to bottom and access the panel from the vertical
  4. Zip left to right, top to bottom, and the panel opens out

No more fighting to squeeze something through the zipper.  The beauty is in the details, so notice how Scott has added a flap in the corner to protect the two zippers from water immersion. 

Thanks Scott, the bag rocks!!

Updated Lake MXZ 303 Winter Shoes

Lake-MXZ303-1889097_1.jpg

It looks like Lake is not resting with what has been a big success for them but is instead continuing to evolve their winter cycling boot with the new MXZ 303 model.  This looks interesting, I just hope that it is built on a wider last than before.

A couple of things I noted in the press release is the addition of insulation in the Toe Box area and a new foot bed liner to help insulate your foot from the cold that seeps through your metal cleat.  The boots still have the same style lacing which I must say I actually liked when in the deep cold.  It was easy to operate and never did fail.  However, if you are going into the wilds away from support, then this is simply one other thing to break.

The Lake's are notoriously narrow, which is so detrimental to keeping your feet warm in the winter. I am still banking on the 45Nrth Wolvhammers as my first option, but these are intriguing because of the price differential.  The Wolvhammers are more than $100 more expensive and since I am going to mod my boots with a special deep winter overboot, this may be a better route.  

Buy a couple of sizes larger and order the wide version.  Bikeman.com has them on pre-order now.